AVE Vsi-Pro Max Spezifikationen PDF herunterladen (Seite 3)

TCPIP232 Hardware Configuration:

TCPIP232 hardware operation depends on your network connection. TCPIP232 is able to

operate with HUB and Network Switcher. There are 2 hardware configurations:

1. Mirror Mode

This Mode supports HUB and Programmable Network Switchers. The user needs

to provide a port for TCPIP232 to capture ATM transactions on the HUB and needs to

mirror the ATM LAN port for TCPIP232 port to capture data. This kind of switcher we called

“ programmable network switcher” which is very expensive.

2. Tapping Mode.

The Tapping mode supports HUB and Typical Network Switcher. Tappping Mode

captures ATM transactions by tapping receiving data at the ATM only. So HUB and Switch

will not see TCPIP232 as a network device. see Figure 3

Figure 3. TCPIP232 Hardware Silkscreen

Tapping Mode Setup. (This is defualt from manufacturer)

1. Close JP7 and JP15. Open JP16

2. Open all jumper on JP6

Mirror Mode Setup

1. Close JP7, JP15, JP16

2. JP16 Close Pin1-2, Pin3-4, Pin5-6,Pin7-8,Pin9-10,Pin11-12,Pin13-14,Pin15-16

3. Take U17 out

PAGE 3

1 2 3 4 5 6 7 8 ... 11 12

Keine Kommentare

AVE Vsi-Pro Max Spezifikationen Seite 3