AVE Video Serial Synchronous ATM Interface VSSI-PRO Bedienungsanleitung

ADPROFastTraceInstallation & User Manualfor 5, 10 and 20 Channel ModelsPart No. 201172.05TM®

Table of ContentsADPRO FastTrace, Issue 52.3.1.3.2 Daylight Saving ...

Table of ContentsADPRO FastTrace, Issue 52.3.3.5.5.8 Configure Transaction Data ...

Table of ContentsADPRO FastTrace, Issue 52.3.4.6.3 Entry Path Zone(s)...

11.0 Installation

InstallationADPRO FastTrace, Issue 5 1 - 31.1 Unpacking the ADPRO FastTraceAfter unpacking the ADPRO FastTrace, carefully check for any sign of damage

Installation1 - 4 ADPRO FastTrace, Issue 5• Environment - Choose an inside location that is cool and dry. Do not mount the ADPRO FastTrace anywhere ne

InstallationADPRO FastTrace, Issue 5 1 - 51.4 FamiliarisationAll external connections to the ADPRO FastTrace chassis are made via the rear panel, refe

Installation1 - 6 ADPRO FastTrace, Issue 5INPUT-OUTPUT• GP SERIAL 1 - (9-pin D - Male) - RS-232 serial port with maximum 38,400 bps data rate• GP SERI

InstallationADPRO FastTrace, Issue 5 1 - 7CONFIGURATION SWITCHFigure 1-2 - Configuration Switch Settings1.5 System Wiring Considerations1.5.1 Electrom

Installation1 - 8 ADPRO FastTrace, Issue 51.5.1.1 FCC Advice for Installers and Users in the United States ADPRO FastTrace equipment has been tested a

IntroductionADPRO FastTrace, Issue 5 iiiADPRO FastTrace is an advanced, high performance digital video and audio recorder optimised for remote search

InstallationADPRO FastTrace, Issue 5 1 - 91.7 Setting the Video StandardADPRO FastTrace can be set to operate using either PAL (CCIR) or NTSC (RS170)

Installation1 - 10 ADPRO FastTrace, Issue 51.8.1 Video Input RequirementsTo ensure high quality images, the ADPRO FastTrace must synchronise correctly

InstallationADPRO FastTrace, Issue 5 1 - 111.10.1 COMMS 1COMMS 1 is a serial communications port and is used to connect to modems and terminal adaptor

Installation1 - 12 ADPRO FastTrace, Issue 51.10.3 NETWORK PortConnection to an IEEE 802.3 Ethernet Local Area Network is via the NETWORK port. ADPRO

InstallationADPRO FastTrace, Issue 5 1 - 13Configuring the ADPRO FastTrace via the Ethernet connection is further discussed in the Setup Section (refe

Installation1 - 14 ADPRO FastTrace, Issue 5The pinouts for the 9-pin D male connectors are shown.Table 1-4 - GP Serial port pin outs1.12 PTZ PortTelem

InstallationADPRO FastTrace, Issue 5 1 - 151.12.1 PTZ Port SetupThe following points are applicable to the PTZ port.• Telemetry stations are connected

Installation1 - 16 ADPRO FastTrace, Issue 5. 1.13 Alarm InputsThe ADPRO FastTrace Model 5020 has thirty external Alarm Inputs, all with selectable tam

InstallationADPRO FastTrace, Issue 5 1 - 17The setup options for Alarm Inputs are described with reference to the ‘rest’ or non-alarm position of a se

Installation1 - 18 ADPRO FastTrace, Issue 51.14 Control OutputsControl Outputs are used to control (switch on or off) external (third-party) equipment

IntroductionADPRO FastTrace, Issue 5 vCopyrightThe ADPRO FastTrace hardware, firmware and accompanying written materials are subject to copyright. Una

InstallationADPRO FastTrace, Issue 5 1 - 19Figure 1-9 - External Relay - Typical output circuit1.15 Mode Select InputThe way an ADPRO FastTrace operat

Installation1 - 20 ADPRO FastTrace, Issue 51.17 General Alarm Relay OutputA Form C single pole changeover contact set is available on the rear panel.

InstallationADPRO FastTrace, Issue 5 1 - 21Audio Connector Table 1-6 - Local Audio signals 9-pin DECA connectorFigure 1-10 - Audio Connector PinoutsPi

22.0 Setup

SetupADPRO FastTrace, Issue 5 2 - 32.1 Power UpThe green Power and the red Status LED’s on the front panel are lit as soon as power is applied to the

Setup2 - 4 ADPRO FastTrace, Issue 52.2.1 Local SetupWhen first configuring the ADPRO FastTrace for operation at a remote site, it is recommended that

SetupADPRO FastTrace, Issue 5 2 - 52.2.1.1 Installing ADPRO Video Central LiteStart the PC and insert the ADPRO Video Central Lite CD-ROM. If the Auto

Setup2 - 6 ADPRO FastTrace, Issue 5To start the ADPRO Video Central Lite program, double-click the ADPRO Video Central Lite icon.2.2.1.1.2 Accessing A

SetupADPRO FastTrace, Issue 5 2 - 7The Default check box in the communications section sets the currently selected communication type as the default f

IntroductionADPRO FastTrace, Issue 5 vii Summary of Limitation of Liability for Vision Fire & Security.This ADPRO Product must only be installed,

Setup2 - 8 ADPRO FastTrace, Issue 52.2.1.1.4 Connecting to the ADPRO FastTraceEnsure the ADPRO FastTrace has completed its start-up checks (as indicat

SetupADPRO FastTrace, Issue 5 2 - 92.2.1.1.5 Setting the Operational Parameters:The ADPRO FastTrace is factory configured with typical operating value

Setup2 - 10 ADPRO FastTrace, Issue 52.2.2 Leaving User Settings When changes to the setup parameters are completed, options available are:• Save to Fa

SetupADPRO FastTrace, Issue 5 2 - 11• If the selected settings file is incompatible, that is, the loaded file is newer than remote unit’s settings, th

Setup2 - 12 ADPRO FastTrace, Issue 52.3.1.1 Site NameEach ADPRO FastTrace must have a unique Site ID. The maximum site ID alpha-numeric length is 9 ch

SetupADPRO FastTrace, Issue 5 2 - 132.3.1.3.1 Time ZoneDatabase records within the ADPRO FastTrace are timestamped using Universal Time (UT). The Time

Setup2 - 14 ADPRO FastTrace, Issue 52.3.2.1 Ethernet PropertiesA direct connection to a 10BaseT or 100BaseTX Ethernet network can be made via the Ethe

SetupADPRO FastTrace, Issue 5 2 - 152.3.2.1.3 Default GatewayFactory Default No GatewayFor communication with ADPRO Video Central Lite located on anot

Setup2 - 16 ADPRO FastTrace, Issue 5The Serial Communications Port 1 Settings and Serial Communications Port 2 Settings menus allow the operating para

SetupADPRO FastTrace, Issue 5 2 - 172.3.2.2.2 Line TypeOptions: Dial, Leased Line. Factory Default: DialThe Dial option is used for analogue (PSTN) o

IntroductionADPRO FastTrace, Issue 5 ixYou acknowledge that this is a summary of warranties and you have read and agree to the General Terms and Condi

Setup2 - 18 ADPRO FastTrace, Issue 52.3.2.2.6 Initialisation StringThis option is used to enter additional Hayes AT commands (in ASCII format) that ma

SetupADPRO FastTrace, Issue 5 2 - 192.3.2.2.9 Enable PAPFactory Default: NoSet this checkbox to enable Password Authentication Protocol. PAP will auth

Setup2 - 20 ADPRO FastTrace, Issue 52.3.2.3 Advanced Communication PropertiesBase Port Number:Options: <value> Range is 2049 to 65536Factory Def

SetupADPRO FastTrace, Issue 5 2 - 212.3.2.3.2 Main Communications LinkOptions: Ethernet, Serial Communications 1, Serial Communications 2Factory Defau

Setup2 - 22 ADPRO FastTrace, Issue 52.3.2.3.4 Connection Separation (seconds)Options: <value in seconds> Range 5 to 300Factory Default: 5Connec

SetupADPRO FastTrace, Issue 5 2 - 232.3.3 Connected EquipmentThe Connected Equipment menu provides a number of sub-menus to configure the settings tha

Setup2 - 24 ADPRO FastTrace, Issue 52.3.3.2 PTZ SettingsOptions: No PTZ, ADPRO Amux, Baxall ZMX, Baxall ZTX, Baxall Coax Alt, Baxall Coax Std, BBV Co

SetupADPRO FastTrace, Issue 5 2 - 25The status of a Channel is shown by a small icon to the left of the Channel number.•A Channel is free when the ‘em

Setup2 - 26 ADPRO FastTrace, Issue 52.3.3.3.5 Use Activity DetectionThe ADPRO FastTrace can be setup to respond to changes that occur within the field

SetupADPRO FastTrace, Issue 5 2 - 27When the option is selected a display of the selected camera's image is shown along with three buttons.The cu

IntroductionADPRO FastTrace, Issue 5 xiDECLARATION OF CONFORMITYManufacturer's Name: Vision Fire & Security Pty Ltd.Manufacturer's Addre

Setup2 - 28 ADPRO FastTrace, Issue 52.3.3.4 MonitorA local monitor can be connected to the ADPRO FastTrace and used to display a number of camera view

SetupADPRO FastTrace, Issue 5 2 - 29The status of a channel is shown by a small icon to the left of the channel number. A channel is free when the ‘em

Setup2 - 30 ADPRO FastTrace, Issue 52.3.3.5.2 ProtocolOptions: NCR ATM, AVE VSSI-PRODefault: NCR ATMSelect the type of protocol used by the Transactio

SetupADPRO FastTrace, Issue 5 2 - 312.3.3.5.5.2 Central IP AddressFactory Default 0.0.0.0The Central IP Address is used to identify the TCP/IP network

Setup2 - 32 ADPRO FastTrace, Issue 52.3.3.5.5.7 Flow ControlOptions: Hardware, NoneDefault: NoneSets the type of Flow Control used to transfer data b

SetupADPRO FastTrace, Issue 5 2 - 33If users highlight the Transparent Data Port in the Category column the above dialog will be presented.To enable t

Setup2 - 34 ADPRO FastTrace, Issue 52.3.3.5.6.2 ParityOptions: None, Odd, EvenDefault: NoneSets the Parity used when transferring data locally between

SetupADPRO FastTrace, Issue 5 2 - 35Figure 2-11 - Alarm Contacts ListWhen the Configure button is used, changes to the Alarm Contact Settings can be m

Setup2 - 36 ADPRO FastTrace, Issue 52.3.3.5.7.3 Hold TimeOptions: When active, 2 sec, 5 sec, 10 sec, 30 sec, 60 sec.Factory Default: 10 secondsWhen t

SetupADPRO FastTrace, Issue 5 2 - 37Figure 2-12 - Control Output Settings MenuWhen the Configure button is used, the following settings can be made.2

Safety ProceduresADPRO FastTrace, Issue 5WARNING INFORMATIONInstallations in the United States of America and CanadaFor systems installed in the Unite

Setup2 - 38 ADPRO FastTrace, Issue 52.3.3.5.8.4 Disconnect OperationOption: Reset, LatchDefault: ResetDefines the operational state of the Control Out

SetupADPRO FastTrace, Issue 5 2 - 392.3.3.5.9.3 Audio Input GainOptions: Range 0 to 15Factory Default: 2Choose a volume level between 0 (lowest) and 1

Setup2 - 40 ADPRO FastTrace, Issue 52.3.4.1.2 Event (Recording Retention Time)Range: more than the Normal Retention time (mentioned above) to 1000Defa

SetupADPRO FastTrace, Issue 5 2 - 412.3.4.2.2 Mode SelectionOptions: Use External Input, Use CalendarDefault: Use External InputThe Use External Inpu

Setup2 - 42 ADPRO FastTrace, Issue 5•Video Capture• Event Triggers• Event ResponseSelect the required tab to access the settings for the camera.2.3.4.

SetupADPRO FastTrace, Issue 5 2 - 432.3.4.4.3 Capture Settings - DefaultsThe following table shows the Capture Settings defaults:QualityRange: 1 to 7S

Setup2 - 44 ADPRO FastTrace, Issue 52.3.4.4.4 Event TriggersUsers can choose from two triggering methods to select ‘how’ a channel is activated for an

SetupADPRO FastTrace, Issue 5 2 - 452.3.4.4.5.2 Dial Out on EventThe Dial out on event option is used to define whether the ADPRO FastTrace will attem

Setup2 - 46 ADPRO FastTrace, Issue 52.3.4.5 Multi-Screen Live BehaviourThis feature allows the User to view multiple channels in Live Mode simultaneou

SetupADPRO FastTrace, Issue 5 2 - 472.3.4.5.1 Guard Tour SettingsTo select which cameras are included in the Guard Tour click on the configure button.

Safety ProceduresADPRO FastTrace, Issue 5WARNINGConnection to Other EquipmentAll interface ports on the ADPRO FastTrace must be only connected to othe

Setup2 - 48 ADPRO FastTrace, Issue 52.3.4.5.2.1 Adding a new profile• click the New Profile button• A new entry New Profile will be added to the Gener

SetupADPRO FastTrace, Issue 5 2 - 492.3.4.5.2.5 Adding a camera from the Cameras listbox to the Profile Layout control• Highlight the camera entry in

Setup2 - 50 ADPRO FastTrace, Issue 52.3.4.5.2.6 Modifying a Profile Layout• The placement of cameras within the layout can be altered at any time usin

SetupADPRO FastTrace, Issue 5 2 - 512.3.4.6.1 Entry Path and DelayAlarms and their associated images originating from the Entry Point and Entry Path Z

Setup2 - 52 ADPRO FastTrace, Issue 52.3.4.6.4 Exit Path and DelayWhen the ADPRO FastTrace is ‘sealed’ (i.e. set into the Secure mode), alarms from sen

SetupADPRO FastTrace, Issue 5 2 - 532.3.5.1 Temperature MonitorThere is an option present to enable the reporting of a high temperature event to Video

Setup2 - 54 ADPRO FastTrace, Issue 52.4 Event LogThe ADPRO Video Central has the capability to download the contents of a remote ADPRO FastTrace ‘site

33.0 Specifications

SpecificationsADPRO FastTrace, Issue 5 3 - 33.1 ADPRO FastTrace Version 1.02An ADPRO FastTrace system consists of one or more Multi-Site Video Securit

Specifications3 - 4 ADPRO FastTrace, Issue 5Function DescriptionNetwork Port 1x Ethernet 10BaseT / 100BaseT compatible supporting TCP/IP. RJ-45 connec

Table of ContentsADPRO FastTrace, Issue 5 11.0 Installation...

SpecificationsADPRO FastTrace, Issue 5 3 - 5Warranty 24-months on all components except Hard Disk Drive (HDD) units where manufacturers warranty and c

Specifications3 - 6 ADPRO FastTrace, Issue 53.2 ADPRO Video Central Lite Version 8.04Function DescriptionOperating System Windows XP (Professional Edi

ADPRO FastTrace, Issue 5INQUIRIESAUSTRALIAVision Fire & SecurityPrivate Bag 215495 Blackburn RoadMount Waverley Vic 3149AustraliaTelephone +61 3